Skip to main content
Collection highlight

Junkers W 34f/fi

Highlights

  • Manufactured from 1926 to 1935 by Germany’s Junkers Flugzeugwerke
  • A light transport powered by an air-cooled, radial engine; it accommodated six passengers and two crew
  • Considered one the best bush planes of the 1930s and early 1940s due to its gentle flying characteristics and rugged construction
  • Only nine Junkers W33s and W34s were imported to Canada; all except one flew for Canadian Airways
  • The Bremen, a W33 with a water-cooled engine, flew the first east–west trans-Atlantic flight in 1928, landing on Greenly Island near the Quebec–Labrador boundary after a thirty-seven-hour flight
  • First flight was in 1926
...

Artifact no.: 1967.0669

Manufacturer: Junkers Flugzeugwerke A.G.

Manufacturer location: Germany

Manufacture date: 1931

Acquisition date: 1962

Registration number: CF-ATF

History

The Junkers W34 continued the line of all-metal Junkers aircraft going back to the Junkers J.I. With its good flying characteristics and rugged construction, the Junkers W34 was considered by many to be the best bush plane of the 1930s and early 1940s. Only nine were imported to Canada due to the high cost of its metal construction and the heavy tariff imposed on German aircraft. Canadian Airways was the primary Canadian operator.

A Junkers W33 with a water-cooled engine flew the first east-west trans-Atlantic flight in 1928. It landed on Greenly Island in Labrador after a 37-hour flight.

The W34 was widely exported and up to the end of Second World War was the German Air Force’s standard instrument and navigation trainer. The Museum example was still flying up until its donation to the Museum in 1960. The handover ceremony in 1962 was the last flight of any of the Junkers F13/W33/W34 family of aircraft.

Current location

Northern and Bush Flight Exhibition, Canada Aviation and Space Museum

Provenance

Donation from Mrs. J.A. Richardson

Made in 1931, this Junkers W34 was registered to Canadian Airways in December 1932. In its early years, it was based at Oskélanéo, Quebec, from where it mainly served the mining industry in the Chibougamau area. In the summer of 1939, it was sent west to Lac du Bonnet, Manitoba, where it was flown mostly in the Red Lake area. Over the next twenty years the aircraft changed hands several times, until it was finally sold in 1962 to the widow of James A. Richardson, founder of Canadian Airways. Muriel Sprague Richardson donated the aircraft to the Museum on September 17, 1962. The aircraft was flown from Kamloops, British Columbia to the Museum. The aircraft’s handover ceremony marked the last flight of any of the Junkers F13/W33/W34 family of aircraft.

Technical information

Wing span
17.8 m (58 ft 3 1/2 in)
Length
10.3 m (33 ft 8 3/8 in)
Height
3.2 m (10 ft 6 in)
Weight, empty
1,655 kg (3,649 lb)
Weight, gross
3,200 kg (7,055 lb)
Cruising speed
222 km/h (138 mi)
Max speed
264 km/h (164 mph)
Rate of climb
2,000 m (6,560 ft) / 9 min
Service ceiling
6,900 m (22,640 ft)
Range
789 km (490 mi)
Power plant
one Pratt & Whitney R-1340-AN-1 Wasp, 600 hp, radial engine

Newsletter

Subscribe to our newsletter to be the first to learn about what’s going on at the Ingenium museums!